GN Big Bowl Decanter Centrifuge for Overseas Mining Tailing Dewatering Projects

Among recent projects of GN Separation, there is one set of system for a mining tailing dewatering projects, and the jobsite location is an extremely cold country outside China. This system contains following equipment and facilities:

1. Decanter centrifuge GNLW764A-VFD. GNLW 764 is the largest decanter centrifuge model among GN decanter centrifuges. The centrifuge bowl diameter is up to 30 inch, and the bowl’s length-diameter ratio is 4, which enable the decanter centrifuge to have a large capacity meanwhile a long trip for a dry treating result. In such systems, always the big bowl centrifuges with a length-diameter ratio of 4 are more practical, for example, the 30 inch bowl model GNLW764A-VFD and a 22 inch bowl model GNLW554-VFD.

2. Chemical dosing unit. Chemical dosing units are always an auxiliary device for the decanter centrifuges when there are a large portion of extra fine particles in the slurry or material to be treated. The chemicals prepared by the chemical dosing units always contain some polymer for flocculating the extra fine particles into larger ones, in order to be separated out by the decanter centrifuges. Before the centrifuge inlet, there is a T connection on pipeline with one point for chemical dosing pump.

3. 40FT Containers for holding the centrifuge and dewatering units. The 40ft containers are not standard containers, but they are made with container anchoring corners for easy transportation. Comparing with standard containers, those 2 sets of 40ft containers are equipped with windows and doors and insulation layer. The 2 containers are located as one on top of the other, the upper one is for the centrifuge, cause the centrifuges are requested to be located on a certain height, meanwhile, it can help with saving space. The chemical dosing unit is located in the lower container.

For more information, welcome to contact GN directly.

GN Linear Vibrating Screen for Domestic Core Drilling Fluids Cleaning

As long as the equipment is used for projects which involve separating works, there are something in common. For example, the drilling projects need to treat the slurry by removing the particles, and for mining projects there are vibrating screens used for collect certain particles with correct sizes. As a leading manufacturer and solution provider in separating works, GN Separation is able to suggest clients the most suitable equipment or system.

Just recently, GN Separation has finished the manufacturing for a vibrating screen system for a core drilling fluid cleaning project in domestic China. And the main equipment is a linear motion vibrating screen which was designed for mining. This machine, together with some other equipment, were used for core drilling fluids cleaning, including following:

1. Mining vibrating screen GNLMP 1224. It is a self-designed equipment with screen size nearly 3 square meters. GN has an advanced facility with cutting, welding and painting procedures. All side walls of the vibrating screen is made of a whole plates without any welding in order to ensure the strength. All screens are screen panels made of polyurethane and service life is longer than 6 months.

2. Customized mud gas separator. It is originally an equipment used in oil and gas drilling, for removing the gas from the drilling fluids. In fact, in other drilling works, there is some gas in the fluids shall be removed. This equipment is customized based on oil and gas mud gas separator, suitable for the core drilling.

3. Centrifugal pump GNSB6X5j-370c and collection tank. Centrifugal pump is anther core product of GN Separation for different applications. Also, GN has other pumps and conveyors available.

For more technical information or commercial information, welcome to contact GN team freely or visit GN factory.

3-Phase Disc Stack Separator for Overseas Vegetable Oil Separation

GN Separation Equipment is an enterprise focusing on the designing of separating and conveying equipment manufacturing and solution providing. The core products and best seller equipment of GN Separation are shakers, decanter centrifuges, disc stack separators, screw press for dewatering and chemical dosing unit. Vibrating screens for mining is another product group of GN Separation.

Both three phase decanter centrifuges and disc stack separators are used for separation of oil, water and solids. Disc stack is suitable for the material with a small portion of solids, which is also capable of separating the oil clearly. Recently, GN Separation provided such a disc stack separator to a client who uses this machine for vegetable oil separating application. This machine’s model is GNSD225. Here are the main specificaitons:

1. Bowl diameter of this disc stack is 810 mm
2. The diameter of the piston used in this machine is 730 mm
3. Rated treating capacity is 30-40 m3 per hour.
4. Rotating speed is 4500 RPM.
5. Volume is 27 liters.
6. Motor power is 75kw.
7. Driven type: belt driven
8. Time for starting up: 8 to 10 minutes.
9. Time for shutting down: 30 minutues.
10. Outsourced bearing brand：SKF.
11. Raw material for the rotating bowl, bowl cover and big piston: duplex stainless steel SS2507.
12. Control cabinet: VFD controlled with PLC from SIEMENS. VFD’s are sourced from ABB brand. And touching screen is from Schneider. Languages could be shifted between English and Chines. ：
13. Filter: the filter is designed containing water. It is made per food standard and all sealing parts are made of flourorubber.

Here on this links below are all available disc stack models offered by GN Separation.

https://www.gnseparation.com/disc-stack-separator

Welcome to Visit GN Booth at CIME 2023 Mining Exhibition

In this hot July, there will be an international mining exhibition to be held in Shenyang City, the largest city in Northeast China. The full name of this Exhibition is CIME 2023, the 3rd Sino-foreign Mining Industry Chain Development Forum, which will be held from July 27th to 29th in Shenyang International Exhibition Center.

GN Separation will attend this exhibition, brining GN Vibrating Machines and other equipment used for mining industry.

About GN Separation: GN Separation is sister company of GN Solids Control, a leading brand in oil and gas solids control industry, which is exporting its products to 80+ countries in the world. GN Solids Control is mainly focusing on the drilling fluids solids control and waste management equipment and systems, while GN Separation covers other industries like mining, water treatment, food and beverage industry. Mining Vibrating Screens and Decanter Centrifuge are quite popular products for GN clients from mining industry.

For this CIME 2023, GN Separation will bring following equipment:

1. Stack vibrating screens. Stack vibrating screens are designed by GN team for wet screening, classification and dehydration of fine grained materials in mineral processing, coal preparation and etc. Two or more screen decks are stacked together, with same deck size and openings. The input material will be divided to each deck evenly and the output will be collected together. There is only one energy source for all decks. This design maximizes the usage of both the vibrating motors and the limited room.

2. Dewatering vibrating screen. Dewatering vibrating screen and classification vibrating screen are two kinds of GN middle sized vibrating screens. Their barriers are not so huge between the two kinds of screens. In fact, some clients are using classification vibrating screens for dewatering applications. But GN dewatering screen is more efficient with a slight modification.

3. Screen panels and screen meshes. The screen panels on the dewatering screen and screen meshes on stack vibrating screens are both manufactured by GN Separation. GN vibrating screen panels are polyurethane covered while GN vibrating screen meshes are fully polyurethane.

Welcome to meet GN team at GN Booth BT05 in Hall E3, from July 27th to 29th.

GN Solids Control System for oil drilling to India Company

Solids Control equipment and system are always the core products for GN Solids Control. As is clearly shown, the Solids Control is the main parts in GN’s company name. Each year, GN designs and sells tens of complete solids control systems to lots of oversea countries. Sometimes, GN makes the equipment sets for a whole solids control system for clients to build up their own mud tank systems in their own facilities. This system is a complete drilling fluids solids control system for a client from India. It is a repeated order from GN old customer.

This drilling fluids solids control system contains following equipment:

1. Double deck shale shaker GNSZ706J. Shale shaker always shows up in the first stage to remove the largest share of drilling cuttings. Comparing with a single deck shale shaker, a double deck shale shaker can increase the treating capacity by 30%. The drilling mud falls onto the upper deck of shaker with comparably coarse screens for the 1st separation, then onto the lower deck with finer screens for the 2nd separation.

2. Vacuum degasser GNZCQ270. A degasser is used to remove the gas bubbles from the drilling mud. It can help to protect the pumps after the vacuum degasser. GN Vacuum degasser has a special design which doesn’t need an additional feeding pump. It is always located after the shale shaker and before the desander and it can also plays the role as a large mud agitator.

3. Desander GNWSJ-2S. This is a desanding unit without underflow shaker. It is fed by a centrifugal pump and is used to remove particles larger than 40 microns.

4. Desilter GNZS752-12N. Desilter cyclones are used to remove particles larger than 20 microns, and it is also fed by a centrifugal pump. This one is equipped with an underflow shale shaker with 2 pieces of screens.

5. Drilling fluids decanter centrifuge GNLW363D. Decanter centrifuge is used to remove the fine particles from the drilling liquid, ranging from 2 to 5 microns.

6. Mud tank system including centrifugal pumps and mixing hopper.

Based on your own standards and requests, GN team can give customized solutions.

GN Solids Control Centrifuge at 2023 NEFTEGAZ Russia Oil Exhibition

The Russia Oil Exhibition NEFTEGAZ 2023 was held by end of April in Moscow, which was a sign of recovery after the three years’ pandemic, the recovery of the whole economy all over the world. As also since the April, China has adjusted the policies for coming in and going out. NEFTEGAZ 2023 was the first exhibition GN has attended after everything is back to normal.

Here is some information about the exhibition: http://www.828i.com/expo/shiyou/143861.html

For this exhibition, GN Solids Control has brought to Moscow following equipment:

1. Solids control decanter centrifuge. In a standard solids control system for oil and gas drilling, the first step is always the shale shakers. And after the shale shakers, sometimes there are desander and desilter cyclones for finer particle removal. But in nowadays, more and more decanter centrifuges are being used after the cyclones. In some cases, end users are even replacing the cyclones with 2 centrifuges, a middle speed one and a high speed one. This time for this exhibition, GN brought a high speed centrifuge.

2. Vertical cuttings dryer. GN has been manufacturing the vertical cuttings dryer from year 2014 and has upgraded its GNCD930 series vertical cuttings dryers for many times. A vertical cuttings dryer is designed especially for treating the drilling cuttings for oil based mud. Those cuttings are generated from the shale shakers’ discharge. After shale shaker, although all large particles are removed, the particles are still too wet, containing valuable drilling fluids. In this case, the vertical cuttings dryers are used for reduce the moisture of cuttings and recover as much fluids at same time.

3. Shale shaker screens. Shale shaker screens are also one of GN Solids Control’s core products. They seem simple, but in fact they are of core technology including the matching of mesh cloth, the strength of frame and etc, which will greatly affect the shaker’s performance. GN is professional in both shale shakers and shaker screens.

For more information, welcome to contact GN sales team directly.

GN Separation Exhibited in the CONEXPO 2023

GN Separation is a brand under GN Group, under the company of GN Separation Equipment Co., Ltd and GN Separation is also establishing its branch office in Houston, USA, to service for its clinets from North and South America. Recently, GN Separation has attended the CONEXPO 2023 which was held in Las Vegas.

For this CONEXPO 2023, GN has brought following equipment:
1. Linear motion shale shaker. Shale shaker is a vital equipment for physical separation works for various applications. GN has a full range of shale shakers from 2 pieces of shaker screens to 6 pieces of shaker screens for matching the different requested capacities. Cause the shale shakers’ performance are always affected by shaker screens, GN is strict and serious with shaker screens, too. And GN has built a factory especially for shaker screens.
2. Decanter centrifuge. Decanter centrifuge is also an efficient equipment for separation works after the shale shaker. If the shale shaker’s advantage is to remove the most particles, the function of the decanter centrifuge is to make the solids dryer and liquid clearer. Decanter centrifuge is a vivid show for a manufacturer’s producing ability.
3. Solids vacuum pump. This is a powerful pump which can handle solids particles as sands and small stones as long as they have some liquidate. GN has several solids pump models for option based on different capacities.
GN has a facility located close to Beijing International Airport, adjacent the capital of China. In a same industry zone, there are GN No. 1 factory and No. 2 factory, the office building is located in the 1st factory of GN, and this factory yard is used mainly for building tanks, shale shakers, mud cleaners and etc. The 2nd factory is equipped with more advanced equipment like the five facets producing machine and dynamic balancing machines for rotating parts, especially for the decanter centrifuges and cutting robots and welding robots for shaker screens. The 3rd factory is newly constructed, which is equipped with most advanced facilities for equipment manufacturing for cutting, welding and painting. And the size of the 3rd factory is 8000 square meters which is larger than the first 2 together.

GNLW554-VFD Decanter Centrifuge for Overseas Glucose Syrup Clarification Project

GN Separation is a brand under GN Solids Control, which is a well-known brand for providing solutions for separation and conveying, and also an equipment manufacturer for separation and conveying. Decanter centrifuge is one of GN separation’s core products, and they are quite popular for many different applications involving separating works like oily sludge treatment, sewage water treatment, fruit and juice treatment, beverage treatment, edible oil and syrup treatment, animal waste disposal and etc.

Recently, GN Separation has fabricated a decanter centrifuge for an overseas client whose work is for glucose syrup clarification. This centrifuge’s model is GNLW554-VFD, with following specifications and features:

1. Big bowl centrifuge with a bowl diameter of 550mm, which equals to 22 inch. And the bowl length is 2310mm, equal to 91 inch.

2. High speed centrifuge, with bowl speed up to 3150RPM, generating a max G force to 3051G.

3. GNLW554 decanter centrifuge has a length-diameter ratio of 4.2,which is large enough for a enough time for clean treatment.

4. A VFD control panel is included in the centrifuge supply, which is equipped with three VFD’s respectively for the main motor, back motor and the feeding pump.

Other features especially for this order:

1. This GNLW554 Decanter Centrifuge’s bowl and propeller are made of SS2205 duplex stainless steel and the collection box is made of SS316L.

2. Centrifuge’s propeller’s blades are polished, instead of bead weld or tiles in order to meet the special requests for food industry.

3. Sealing parts for this centrifuge are made of flororubber.

GN Separation has an engineer team with totally 60+ years of experiences in centrifuge research and development. Based on different applications and material condition, GN Separation’s engineer team can suggest different material for centrifuge components and also designed with different beach angles.
Welcome to contact GN for consultancy.

GN Separation will attend WATER PHILIPPINES 2023 Expo in March

Within 2 weeks, there will be a water exhibition to be held in Metro Manila, Philippines. GN Separation will attend this exhibition, bringing last year’s best seller equipment. Sure it will be a successful exhibition, so will GN.
As is known to all, Philippines is a beautiful country surrounded by sea in South Asia. It has rich water resources and the environment protection there is practical and strict. How to deal with waters is important there, and sure, should be important everywhere in the world.

Here is the information about the exhibition:
Website of Exhibition: https://www.waterphilippinesexpo.com/
Exhibition Schedule: from March 22nd to 24th , 2023
Location: Metro Manila, Philippines
Exhibition Center：SMX CONVENTION CENTER
GN Booth Number: H15 & 16

What equipment GN will bring to this Exhibition?

1. Mini Decanter Centrifuge GNLW223. GN has been a decanter centrifuge manufacturer for more than 15 years. In GN factory, there is a workshop used especially for decanter centrifuges. In this workshop, GN has a five axis machining center and two sets of dynamic balancing machines, a middle speed one and a high speed one. For all the centrifuge rotating parts, like the propeller and the rotating bowl, will be tested by dynamic balancing machines separately and after assembled together.
GN manufactures various centrifuges models, and this centrifuge GNLW223 is the smallest model.

2. Vacuum pump GNSP-10. It is a compact vacuum pump model, also the smallest model among the 3 models GN makes. It is fully air driven powerful pump which can take even solids like sands and small stones. It can be used for wide applications such like mining, oily sludge, animal waste, small construction materials, and etc. The GNSP-10 and GNSP 20 are equipped with wheels for more flexible.

3. Screw press sludge dewatering machine. It is a practical and economic solution for sludge treatment to squeeze out the liquid from the solid waste.

Welcome to GN Booth for negotiating and exploring future cooperation.

GN Solids Vacuum Pump in Stock Meets the Spot Sales

GN Solids Control and GN Separation are 2 brands under GN company, which are both professional separation solution provider respectively for oil and gas industry and other industries like environment protection, mining, water treatment, animal waste treatment and etc.

GN’s products could be grouped in 2 catalogs: separating and conveying. For separating, there are equipment for liquid and solid separation, like shale shakers, mud cleaners with hydrocyclones, two phase decanter centrifuges, screw press and etc. For mud and gas separation, there are mud gas separation, vacuum degasser and centrifugal degasser. For oil and water separation, there are oil water separator, three phase centrifuge and etc. And there is also chemical dosing system which is used to help with separation. For conveying equipment, GN produces screw conveyor and various pumps, including shearing pump, centrifugal pump, submersible slurry pump and screw pumps. Among all the pumps, the vacuum pump is a quite special one and also the most popular one.

1.GN Vacuum Pump is fully air driven, that’s why it is called vacuum pump. It is generated by an air compressor, with a negative force, it can suck in the material. And with a positive force, it will push out the material to a certain distance. It needs no electricity at all, so it is fully explosive proof.

2.GN vacuum pump is also called a solid pump, because it can handle solids particles easily, as long as the particles can pass the pipelines. The material to be transferred need to be liquidate, while liquid is not a must. For example, the sands or small stones can be transferred by the vacuum pump easily.

3.GN Vacuum pump can be used for different applications, including oily sludge industry, refinery, animal waste, chemical transferring, minerals, coal powders and etc.

Clients from different industries are coming to GN for purchasing this pump. That’s why, for the 3 standard models, GN are making stock for quick delivery for clients. Please contact GN team for confirming the soonest delivery time.