Monthly Archives: June 2023

GN Solids Control System for oil drilling to India Company

Solids Control equipment and system are always the core products for GN Solids Control. As is clearly shown, the Solids Control is the main parts in GN’s company name. Each year, GN designs and sells tens of complete solids control systems to lots of oversea countries. Sometimes, GN makes the equipment sets for a whole solids control system for clients to build up their own mud tank systems in their own facilities. This system is a complete drilling fluids solids control system for a client from India. It is a repeated order from GN old customer.

2023.06.15 Decanter Centrifuge

This drilling fluids solids control system contains following equipment:

1. Double deck shale shaker GNSZ706J. Shale shaker always shows up in the first stage to remove the largest share of drilling cuttings. Comparing with a single deck shale shaker, a double deck shale shaker can increase the treating capacity by 30%. The drilling mud falls onto the upper deck of shaker with comparably coarse screens for the 1st separation, then onto the lower deck with finer screens for the 2nd separation.

2. Vacuum degasser GNZCQ270. A degasser is used to remove the gas bubbles from the drilling mud. It can help to protect the pumps after the vacuum degasser. GN Vacuum degasser has a special design which doesn’t need an additional feeding pump. It is always located after the shale shaker and before the desander and it can also plays the role as a large mud agitator.

3. Desander GNWSJ-2S. This is a desanding unit without underflow shaker. It is fed by a centrifugal pump and is used to remove particles larger than 40 microns.

4. Desilter GNZS752-12N. Desilter cyclones are used to remove particles larger than 20 microns, and it is also fed by a centrifugal pump. This one is equipped with an underflow shale shaker with 2 pieces of screens.

5. Drilling fluids decanter centrifuge GNLW363D. Decanter centrifuge is used to remove the fine particles from the drilling liquid, ranging from 2 to 5 microns.

6. Mud tank system including centrifugal pumps and mixing hopper.

Based on your own standards and requests, GN team can give customized solutions.